For over 25 years, K-Factory has been
France's leading manufacturer of electric burners

The 403 SI glass holder offers a tray to support the load of the flat-bottomed, full container.

Its porosity allows a better heat distribution, and to heat the plate evenly. 

Weight: 507 G

The Temperature Controller is equipped with a manual voltage regulator.

The connection is made at the back of the Regulator. 

This device allows to gradually power up the connected device. The operator controls his working temperature and can perform manipulations that require precision. 

This aluminium rod can be placed in all corners of the Lab 2/3 electric burners. It allows you to perform multiple assemblies.

This metal plate is pierced in its center to allow the positioning of Ecoflam pellets for the realization of combustion of metallic powders with flame as well as flame coloring tests. 

Combustion residues are easily recovered on the plate.

This plate allows the combustion of solids, especially the iron/sulphur mixture.

The mixture is placed directly on the plate and the reaction is triggered spontaneously by heat. 

The reaction on the plate is better visible than in a test tube. 

Environmentally friendly process for producing a flame with an electric burner. 

The ECOFLAM pellet is a natural product that produces a flame lasting about 2 minutes.  

To produce a flame, place an ECOFLAM pellet on the electric burner’s grille. The pellet ignites on contact with the hot air column. There is no toxic fumes during combustion. 

Sold in a 85g jar.

This plate allows the use of the sterile area generated by the device for microbiology manipulations.

A Lab 2/3 burner accepts up to four plates simultaneously. 

The sterile space generated by the hot air column of the appliance allows for the destruction of bacteria at plate level. 

This aluminium rod can be placed in all corners of the Lab 2/3 electric burners. It allows you to perform multiple assemblies.

This glass holder is used to attach test tubes or balloons to the Lab 2/3 electric burners.

For perfect stability, all containers must rest on the grid. 

Test tube and flat bottom balloon not provided.

This metal plate is pierced in its center to allow the positioning of Ecoflam pellets for the realization of combustion of metallic powders with flame as well as flame coloring tests. 

Combustion residues are easily recovered on the plate.

This plate allows the combustion of solids, especially the iron/sulphur mixture.

The mixture is placed directly on the plate and the reaction is triggered spontaneously by heat. 

The reaction on the plate is better visible than in a test tube. 

Environmentally friendly process for producing a flame with an electric burner. 

The ECOFLAM pellet is a natural product that produces a flame lasting about 2 minutes.  

To produce a flame, place an ECOFLAM pellet on the electric burner’s grille. The pellet ignites on contact with the hot air column. There is no toxic fumes during combustion. 

Sold in a 85g jar.

This plate allows the use of the sterile area generated by the device for microbiology manipulations.

A Lab 2/3 burner accepts up to four plates simultaneously. 

The sterile space generated by the hot air column of the appliance allows for the destruction of bacteria at plate level. 

This aluminium rod can be placed in all corners of the Lab 2/3 electric burners. It allows you to perform multiple assemblies.

This glass holder is used to attach test tubes or balloons to the Lab 2/3 electric burners.

For perfect stability, all containers must rest on the grid. 

Test tube and flat bottom balloon not provided.

This set was designed for the production of dental prostheses. Consisting of a stem (2204 T), a wax feed gutter (2203 T), a small wax tray for soaking or brush-feeding (2202 T) and a large wax tray for soaking complete models or spoon-feeding (2201 T).

Complete structure or retail to adapt according to your needs.  

The Temperature Controller is equipped with a manual voltage regulator.

The connection is made at the back of the Regulator. 

This device allows to gradually power up the connected device. The operator controls his working temperature and can perform manipulations that require precision. 

This ECOFLAM kit was designed for the study of burning metal powders with flame. 

Composed of a perforated steel plate and a blade inserted into the central groove of the Technibec, this kit allows to arrange an ECOFLAM pad and perform the desired manipulations.

Combustion residues are recovered on the plate and can be observed afterwards.

This table is suitable for initiation and manipulation in microbiology.

To be perfectly sterile, the work area must be upgraded at the heat source. The entire surface of the table allows handling in sterile space and to arrange about ten petri dishes and eight test tubes. (Not supplied)

This solid steel plate allows the study of combustion or reactions requiring heat input, such as the combustion of the iron/sulphur mixture or the dehydration of solids. 

The reagents are placed directly on the plate and ignite in contact with heat. 

Environmentally friendly process for producing a flame with an electric burner. 

The ECOFLAM pellet is a natural product that produces a flame lasting about 2 minutes.  

To produce a flame, place an ECOFLAM pellet on the electric burner’s grille. The pellet ignites on contact with the hot air column. There is no toxic fumes during combustion. 

Sold in a 85g jar.